Maintaining the 2017 Nissan Rogue involves a few critical tasks, and understanding the 2017 Nissan Rogue oil change procedure is at the top of that list. Regular oil changes are the single most effective way to ensure the longevity and peak performance of the 2.5-liter four-cylinder engine that powers this popular compact SUV. This guide breaks down everything from the type of oil to the step-by-step process, ensuring your crossover remains reliable for years to come.
Understanding the 2017 Rogue's Engine Requirements
The heart of the 2017 model year is a 2.5-liter, four-cylinder engine that delivers a balance of efficiency and power. To keep this mechanism running smoothly, using the correct lubricant is non-negotiable. Nissan specifies the use of 0W-20 synthetic engine oil for this model year. This specific viscosity is designed to provide optimal protection during cold starts while maintaining stability at high operating temperatures. Utilizing the wrong grade, such as a thicker 5W-30, can lead to reduced fuel economy and potential long-term damage to the variable valve timing system.
Step-by-Step Oil Change Procedure
Performing the 2017 Nissan Rogue oil change at home requires preparation and attention to detail. First, you must lift the front of the vehicle safely using a jack and securing it with jack stands, as the oil drain plug is located underneath the engine. Before removing the plug, ensure the engine is warm. This warmth allows the oil to flow more freely, draining more completely and carrying away contaminants settled at the bottom of the oil pan. Remember to wear gloves, as the used oil is hot and messy.
Draining the Old Oil
Locate the oil drain plug, which is a large bolt at the bottom of the oil pan. Place an oil catch basin beneath it before loosening the plug. It is important to note that the drain plug uses a 19mm socket size. Once removed, allow the oil to drain for several minutes, ensuring it flows into the container. While the oil is draining, this is the perfect opportunity to replace the crush washer on the drain plug. This small component ensures a proper seal upon reinstallation, preventing future leaks.
Replacing the Oil Filter
Next, locate the oil filter, which is typically situated near the front of the engine bay. Before the old filter comes off, prepare the replacement by applying a small amount of fresh oil to the gasket on the top of the new filter. This step ensures a smooth, airtight seal. Once the old filter is removed, immediately wipe the mounting surface clean of any residual oil or debris. Tighten the new filter by hand; the general rule is to tighten it securely and then give it an additional quarter turn. Over-tightening a filter can make it difficult to remove during the next change.
Fluid Capacities and Torque Specs
Refilling the engine with the correct amount of oil is just as crucial as draining the old fluid. For the 2017 Nissan Rogue, the oil capacity is approximately 4.4 quarts. However, it is best to add the bulk of the oil, check the level, and then top it off slowly to avoid overfilling. Overfilling can create pressure within the crankcase, leading to oil leaks or sensor issues. Furthermore, the oil drain plug typically requires a torque of around 18 lb-ft to ensure it is secure without stripping the threads.
